Home
Original Setup

MTF-Huawei Module 1.0 Sigmakey Needed 2025

MTF-Huawei Module 1.0 Sigmakey Needed, Original Setup,

MTF-Huawei Module 1.0 – SigmaKey Needed

MTF-Huawei Module 1.0 is a specialized tool designed to format Huawei devices, enabling users to resolve issues such as factory resets and FRP (Factory Reset Protection). However, the use of this module requires the SigmaKey software. Without SigmaKey, the module’s full functionality cannot be utilized. This tool is made available thanks to the contributions of Monkey D. Cell and Warriors-GSM.

MTF-Huawei Module 1.0 Sigmakey Needed

READ MORE: 

MDM Fix Tool V1.0.7.7 [Latest Version] 2025

Action Plan: FRP Reset and Fastboot Format

The primary purpose of the MTF-Huawei Module 1.0 is to reset and format Huawei devices efficiently. However, in certain cases, the device may remain stuck on the logo even after formatting. If this occurs, additional steps must be taken to completely remove FRP and ensure a proper reset.

Step-by-Step Guide

Test 1: FRP Reset and Fastboot Format

Prepare the Device

  1. Put your Huawei device into Huawei COM 1.0 mode using the test point method with a modified USB cable.

  2. Ensure your SigmaBox is properly connected to communicate with the device at a low level.

Open SigmaKey

  1. Launch SigmaKey on your computer.

Select the Platform and Port

  1. In SigmaKey, select the following options:

    • Platform: Hisilicon

    • Port: Choose the correct port for the connected Huawei device.

    • Processor: Select Kirin.

Load Fastboot

  1. In SigmaKey, click Load Fastboot to prepare the device for further actions.

  2. Wait for the system to establish a fastboot connection.

Open the MTF-Huawei Module 1.0

  1. Once the fastboot connection is successful, open the MTF-Huawei Module 1.0.

Perform Fastboot Format

  1. On the MTF-Huawei Module, press 2 to initiate the fastboot format process.

  2. Wait for the process to complete.

In Case the Device Logo is Still Visible

If the logo remains after the format, the next step is to enter recovery mode and perform a low-level format.

Step 2: Recovery Mode Format

If your device still shows the logo or remains stuck, follow these additional steps to complete the FRP reset and fastboot format.

Put the Device into Huawei COM 1.0 Mode Again

  1. Reconnect the phone using the test point method with the modified USB cable.

Reopen SigmaKey

  1. Launch SigmaKey again.

Select Platform, Port, and Processor

  1. Ensure the same selections as before:

    • Platform: Hisilicon

    • Port: Correct port for the connected Huawei device.

    • Processor: Kirin.

Load Fastboot

  1. Select Load Fastboot again to re-establish the fastboot mode connection.

  2. Wait for the system to recognize the device.

Remove FRP

  1. On the SigmaKey interface, select the option Remove FRP.

  2. Wait for the tool to proceed with the FRP removal.

Wait for the Process to Finish

Once the FRP removal process is complete, your device should be free from the Google account lock (FRP).

By following these steps, you can efficiently reset your Huawei device and remove FRP, ensuring that it functions without any issues.

Password: By:Warriors-GSM_&_Monkey D. Cell

Get This Tool

Post a Comment